+123 456 4444

CANNON IR3035 DRIVER DOWNLOAD

Click on the title for more information. The latch circuit detects the excessive temperature rise, and the relay is turned off. Making utilization of ideal quality material and ultra-propelled gear and innovation, we are assembling and building up the complete grouping in pair with the business set standards and quality measures furthermore tuned in to the most recent business patterns and rules. F 8 Mount the speaker unit lower [1]. The 3rd sheet is moved for registration once again. Copyright This manual is copyrighted with all rights reserved.

Uploader: Sarn
Date Added: 17 May 2009
File Size: 50.76 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 46027
Price: Free* [*Free Regsitration Required]

Indicates an item requiring care to avoid combustion fire. Use 1pc in this machine [5] Board Support Plate 1pc. Chapter 8 When sliding out the laser scanner unit, be sure to take care not to touch the PCB mounted to the laser scanner unit. F Do not drop the parallel pin when removing the manual feed pickup roller. Chapter 5 F Point i3r035 note after attaching the waste toner receptacle After attaching the waste toner receptacle, move the waste toner full detection lever [1] up and down to make sure that the lever is moved smoothly.

Originally Posted by dan Chapter 5 T F 5. F The 1st sheet is moved for registration once again. The descriptions in this Service Manual are subject to change without notice for product improvement or other purposes, and major changes will be communicated in the form of Service Information bulletins.

  GIGABYTE GA-7VAX-A DRIVER DOWNLOAD

Canon IR 3035 Photocopier Machine

Chapter 2 F B: When a card reader is not mounted on the host machine F B: F 2 Open the right door [1]. Chapter 5 5 Detach the front cover unit [4] by moving it in the direction of the arrow. Fix it on the opposite side in the same procedure.

F 12 Run the cable [1] through the cable guide [2] and mount the cable guide cover [3]. The DC controller software has to be used together with the main controller software of Ver.

Shop Volt Electronics, Home & Office Appliances Online

F 20 Connect one of the AC cable [1] for the host machine outlet to the power cord mount [2] of the heater, and the other to the cassette pedestal of the host machine. FM Paper Feeder Assembly 9. F Point to note after attaching the waste toner receptacle After attaching the waste toner receptacle, move the waste toner full detection lever [1] up and down to make sure that the lever is moved smoothly.

The counter is designed to increase its count when the hopper sensor level is on during a single on-off cycle while toner is being supplied from the sub hopper to the developing assembly. What This Machine Can Do Marchi Di Fabbrica Checking Settings After the power on of the machine, check the following settings to use the voice guidance kit.

The waste toner box can hold about cc of toner, and the machine identifies the waste toner box as being full when there is about cc of toner or when the toner comes to weigh about g.

  LENOVO T61 SATA DRIVER

Details vBulletin Mods by vBSocial. F [1]Speed sensor [2]Reflecting member [3]Fixing film driven by fixing motor [4]Pressure roller [A]Paper feed direction [B]Speed sensor output [C]1 rotation of fixing film Timing of Control The speed of fixing film rotation is monitored at all times after the fixing motor goes on and its speed reaches a specific value. The 5th sheet is turned over, and is moved for duplexing registration.

cannoj Chapter 2 3 Remove the 3 screws [1], and then detach the right cover [2] of the paper deck. Check if the abnormal noise occurs when paper is passing the fixing assembly. Main Controller PCB is canonn. In the event of major changes in the contents of this manual over a long or short period, Canon will issue a new edition of this manual. Important Safety Instructions F 3 Slide the left side plate [1] in the direction of the arrow to detach.

Click on the title for more information. Pay attention to the mounting direction of the sleeve bushing.

The machine will indicate an error code if it finds a fault while running the program. There is no utility for the OS Version you selected.